156-315.77 Online Practice Questions and Answers

The process ________ is responsible for Policy compilation.

A. FWM

B. Fwcmp

C. CPLMD

D. CPD

You want to verify that your Check Point cluster is working correctly. Which command line tool can you use?

A. cphastart -status

B. cphainfo -s

C. cphaprob state

D. cphaconf state

The CoreXL SND (Secure Network Distributor) is responsible for:

A. distributing non-accelerated packets among kernel instances

B. accelerating VPN traffic

C. shutting down cores when they are not needed

D. changing routes to distribute the load across multiple firewalls

How does a standby SmartCenter Server receive logs from all Security Gateways, when an active SmartCenter Server fails over?

A. The remote Gateways must set up SIC with the secondary SmartCenter Server, for logging.

B. Establish Secure Internal Communications (SIC) between the primary and secondary Servers. The secondary Server can then receive logs from the Gateways, when the active Server fails over.

C. On the Log Servers screen (from the Logs and Masters tree on the gateway object's General Properties screen), add the secondary SmartCenter Server object as the additional log server. Reinstall the Security Policy.

D. Create a Check Point host object to represent the standby SmartCenter Server. Then select "Secondary SmartCenter Server" and Log Server", from the list of Check Point Products on the General properties screen.

E. The secondary Server's host name and IP address must be added to the Masters file, on the remote Gateways.

You must set up SIP with a proxy for your network. IP phones are in the 172.16.100.0 network. The Registrar and proxy are installed on host 172.16.100.100. To allow handover enforcement for outbound calls from SIP-net to network Net_B on the Internet, you have defined the following objects: Network object: SIP-net: 172.16.100.0/24 SIP-gateway: 172.16.100.100 VoIP Domain object: VolP_domain_A 1.Endpoint domain: SIP-net 2.VoIP gateway installed at: SIP-gateway host object How would you configure the rule?

A. SIP- G ateway/N et_B/s i p_a ny/a c c e pt

B. VolP_domain_A/Net_B/sip/accept

C. SIP-Gateway/Net_B/sip/accept

D. VolP_domain_A/Net_B/sip_any, and sip/accept

E. VolP_Gateway_MJet_B/sip_any/accept

What is a possible reason for the grayed out Restore Version button in the screenshot of the Database Revision Control while trying to restoreOld Structure?

A. Old Structurewas not approved inSmart Workflow.

B. NoSmart Workflowsession is started.

C. WithSmart Workflowactive, onlySmart Workflowrevisions could be restored.

D. Self-created versions cannot be restored if there are newer versions created inSmart Workflow.

MultiCorp is located in Atlanta. It has a branch office in Europe, Asia, and Africa. Each location has its own AD controller for local user login. How many ADqueries have to be configured?

A. 4

B.

C.

D.

Fill in the blank. In Load Sharing Unicast mode, the internal cluster IP address is 10.4.8.3. The internal interfaces on two members are 10.4.8.1 and 10.4.8.2. Internal host 10.4.8.108 Pings 10.4.8.3, and receives replies. The following is the ARP table from the internal Windows host 10.4.8.108.

Review the exhibit and type the IP address of the member serving as the pivot machine in the space below.

A. 10.4.8.2

B.

C.

D.

Type the full cphaprob command and syntax that will show full synchronization status.

A. cphaprob -i list

B.

C.

D.

Fill in the blank with a numeric value. The default port number for Secure Sockets Layer (SSL) connections with the LDAP Server is

A. 636

B.

C.

D.