200-301 Online Practice Questions and Answers

Refer to the exhibit.

The default-information originate command is configured under the R1 OSPF configuration. After testing, workstations on VLAN 20 at Site B cannot reach a DNS server on the Internet. Which action corrects the configuration issue?

A. Add the default-information originate command on R2.

B. Add the always keyword to the default-information originate command on R1.

C. Configure the ip route 0.0.0.0 0.0.0.0 10.10.10.18 command on R1.

D. Configure the ip route 0.0.0.0 0.0.0.0 10.10.10.2 command on R2.

Which two QoS tools provide congestion management? (Choose two.)

A. CBWFQ

B. FRTS

C. CAR

D. PBR

E. PQ

Refer to the exhibit. Which two configurations must the engineer apply on this network so that R1 becomes the DR? (Choose two.)

A. R1(config)#router ospf 1 R1(config-router)#router-id 192.168.100.1

B. R1(config)#interface fastethernet 0/0 R1(config-if)#ip ospf priority 200

C. R3(config)#interface fastethernet 0/0 R3(config-if)#ip ospf priority 0

D. R1(config)#interface fastethernet 0/0 R1(config-if)#ip ospf priority 0

E. R3(config)#interface fastethernet 0/0 R3(config-if)#ip ospf priority 200

Which SNMP message type is reliable and precedes an acknowledgment response from the SNMP manager?

A. Get

B. Inform

C. Traps

D. Set

What are two functions of DHCP servers? (Choose two.)

A. issue DHCPDISCOVER messages when added to the network

B. respond to client DHCPOFFER requests by Issuing an IP address

C. support centralized IP management

D. assign dynamic IP configurations to hosts in a network

E. prevent users from assigning their own IP addresses to hosts

What is a characteristic of encryption in wireless networks?

A. used to ensure data integrity

B. uses 802.1x as the standard encoding method

C. uses protocols such as TKIP and CCMP to secure data

D. only works with the 5Ghz frequency

Under the CRUD model, which two HTTP methods support the UPDATE operation? (Choose two.)

A. PATCH

B. DELETE

C. GET

D. POST

E. PUT

What is the primary purpose of a console port on a Cisco WLC?

A. in-band management via an asynchronous transport

B. in-band management via an IP transport

C. out-of-band management via an asynchronous transport

D. out-of-band management via an IP transport

What is a function of Layer 3 switches?

A. They route traffic between devices in different VLANs.

B. They transmit broadcast traffic when operating in Layer 3 mode exclusively.

C. They move frames between endpoints limited to IP addresses.

D. They forward Ethernet frames between VLANs using only MAC addresses,

DRAG DROP

Drag and chop the TCP/IP protocols from the left onto their primary transmission protocols on the right.

Select and Place: