201-01 Online Practice Questions and Answers
Assuming that all product features are implemented and enabled, what are the three default Dashboards? (Select 3)
A. Network Operations Dashboard
B. WAN Optimization Dashboard
C. Internet Access Dashboard
D. Network Security Dashboard
E. Datacenter Utility Dashboard
F. Service Dashboard
What is the maximum number of Cascade Gateway and Sensor appliances that can send data to a Standard Profiler?
A. 32 appliances
B. 128 appliances
C. 256 appliances
D. Unlimited
In the Cascade Profiler GUI, which Email Formats are supported for Notifications? (Select 2)
A. Syslog
B. SNMP
C. HTML
D. Facebook
E. PDF
Voice over IP (VoIP) monitoring by Network Performance Management systems typically concerns:
A. Items such Mean Opinion Score (MOS) scores, jitter, and packet loss ?important indicators of potential voice quality issues.
B. PBX Health statistics.
C. Ability to break into a conversation for emergency interruption services.
D. Ability to assure 911 Emergency dialing is available.
E. All of the above.
Cascade collects flow data on which of the following boxes? (Select 2)
A. Sensor
B. Gateway
C. Express Profiler
D. Standard Profiler
E. Enterprise Profiler
Company X wants to incorporate SPAN port monitoring into its Cascade deployment. An important point they should consider is to:
A. Ensure the Cascade Gateway's monitor interface is receiving packets from the SPAN destination interface.
B. Ensure the Cascade Sensor's monitor interface is receiving packets from the SPAN destination interface.
C. Set the Cascade Sensor's monitor interface to the same VLAN as the SPAN destination interface.
D. Set the Cascade Gateway's monitor interface to the same VLAN as the SPAN destination interface.
E. Set the SPAN destination interface the same as at least one source interface to ensure complete coverage.
Cascade Profiler is able to report traffic using two different approaches (centricities). Two approaches can result in different results when using the same report criteria due to the way data is aggregated and counted. What are these two approaches? (Select 2)
A. Interface centric
B. Application centric
C. Host centric
D. Port centric
E. The Cascade Profiler does not have two approaches
What must be considered when sizing a Cascade Shark appliance? (Select 3)
A. Write-to-disk speed
B. NetFlow consumption rate required
C. Protocol support required
D. Capture port types required
E. Packet storage required
Within Cascade Pilot, a sequence diagram is used to:
A. Show timing and other information at the network or data link layer
B. Show timing and other information at the application or transport layer
C. Adjust the length of a trace clip created from a capture job trace
D. Adjust the length of a trace clip created from a packet capture (pcap) file
E. C and D
Protocols that are typically monitored in TCP/IP networks by visibility tools include (Select 3):
A. SAN HBA Protocol
B. TCP Protocols such as HTTP and HTTPS
C. UDP Protocols such as SMTP and Video streaming
D. IPv4 Protocols including TCP, UDP, and ICMP
E. IPv4 Protocols such as x.25, TTY and TTL