220-1101 Online Practice Questions and Answers

A company has a dot matrix printer that uses carbon paper. The company reports that the first page is printing too light, although the following pages are still legible. Which of the following MOST likely needs to be fixed?

A. The print drum is worn and loose causing the printing to be light in places

B. The ribbon is low on ink or missing and must be replaced to get proper output

C. The heating element has failed, and a new one needs to be installed for proper transfer

D. The wrong type of filement is loaded, preventing it from sticking correctly

E. The fuser assembly is not calibrated properly, causing it to impact the paper too hard

A business owner wants to provide security to laptop users with the ability to charge their devices, access corporate LAN resources, and allow for a variety of their removable hardware.

Which of the following devices would BEST meet the owner's needs?

A. Docking station

B. Port replicator

C. Thunderbolt

D. USB hub

A technician receives several error alerts on a server after an unexpected reboot. A message states that one or more disks are in a degraded state. When the technician advances to the next error message, it indicates the OS is missing. Which of the following are the MOST likely causes of these errors? (Choose two.)

A. Missing drives in the OS

B. RAID failure

C. Bootable device not found

D. Data loss

E. Controller failure

F. CMOS corruption

G. TPM malfunction

A Wi-Fi mesh network has been optimized to eliminate poor coverage areas, yet users still experience decreased bandwidth and connectivity issues. Which of the following actions should the technician take NEXT?

A. Relocate any large, dense, solid, and metal objects, such as mirrors and file cabinets, in the mesh network coverage area to the perimeter so that wireless reflections, absorptions, and occlusions are minimized.

B. Use a Wi-Fi analyzer to determine whether the channel in use is overcrowded and to identify which channel the mesh network should use for best performance.

C. Use the signal strength indicator on a mobile device to roam the coverage area and generate a heat map to isolate zones with weak signals.

D. Turn off broadcasting of the SSID on the mesh network so that other networks cannot see it.

A laptop is connected to a conference room projector in extended display mode. The desktop icons appear normal on the laptop, but are disproportionate and illegible on the projector screen. Which of the following should the technician check?

A. Video resolution

B. HDMI connection

C. Keystone

D. Focus

Which of the following devices is capable of dynamically distributing an IP address?

A. Hub

B. Switch

C. Injector

D. Router

A developer is requesting permission to utilize client-side virtualization. The developer would like to write code in a setting isolated from other infrastructure to avoid negative impacts of experimental code. Which of the following provides the best solution for the developer?

A. Cross-platform functionality

B. Software compatibility

C. Test case development

D. Sandbox environment

An administrator wants to replace a fiber-optic cable. Which of the following should the administrator most likely use?

A. LC

B. Bayonet Neill Concelman

C. RJ45

D. DB9

Several users report that a projector routinely turns off in the middle of meetings and does not tum back on immediately. Users have to wait several minutes before the projector will turn back on. When the projector is on, the picture is clear and bright. Which of the following is the most likely reason the projector is turning off?

A. The video cable connecting the video source to the projector is failing.

B. The bulb in the projector is failing.

C. The projector is overheating and needs to be cleaned.

D. The outlet that the projector is plugged into is faulty.

DRAG DROP

You would like to build a PC for storage redundancy. Select the appropriate IDE drives and build the PC for MAXIMUM performance, while using the MINIMUM amount of drives. Instructions: Drives can be reused, but bays are only used once. Select the done button to submit your response.

Select and Place: