300-625 Online Practice Questions and Answers

DRAG DROP

Drag and drop the items from the left onto the correct descriptions on the right. Not all items are used.

Select and Place:

After user account attributes are modified in Cisco NX-OS, when do changes to the user's session attributes take effect?

A. immediately

B. at the scheduled time

C. when the user logs out of a session

D. when the user creates a new session

Which Cisco NX-OS command displays the VSAN that is associated with each FCID?

A. show fcdomain

B. show fc2 plogi

C. show vsan database

D. show flogi database

Which result occurs when a VSAN is deleted that contains non-trunking ports?

A. The ports are moved to VSAN 4094.

B. The ports are moved to VSAN 1.

C. The ports are removed from the configuration.

D. The port configurations are cleared.

Refer to the exhibit.

Which configuration change improves the ability of the link to recover from frame loss?

A. Increase the reset timeout.

B. Enable selective acknowledgment.

C. Increase the send buffer size to 15000 KB.

D. Disable PMTU discovery.

Refer to the exhibit.

What is the result of merging the fabric?

A. The merged fabric IVR VSAN topology is set to activate.

B. The merged fabric has NAT enabled.

C. The merge is invalid.

D. The merged fabric contains only service group Group1.

Refer to the exhibit.

The san-user must configure FSPF on the VSAN 500, but fails. An operator with network administrative rights must authorize the san-user to perform this work. Which configuration must the operator apply?

A. MDS-A(config)# role name sangroup MDS-A(config-role)# no rule 2

B. MDS-A(config)# role name sangroup MDS-A(config-role)# rule 4 permit config feature fspf

C. MDS-A(config)# role name sangroup MDS-A(config-role)# rule 2 permit config feature vsan

D. MDS-A(config)# role name sangroup MDS-A(config-role)# vsan policy deny MDS-A(config-role-vsan)# permit vsan 500

Refer to the exhibit.

A port channel has been configured between a Cisco MDS and a Cisco Fabric Interconnect switch. Which interface(s) in the port channel carry the control plane traffic?

A. per packet, balanced between interfaces fc1/9 and fc1/10

B. from interface fc1/9

C. from interface fc1/10

D. per flow, balanced between interfaces fc1/9 and fc1/10

After a subordinate switch requests a domain ID form a principal switch, the requested domain ID becomes the runtime domain ID, and all interfaces on the affected VSAN are isolated. What is a solution to the issue?

A. Add the received ID to the allowed list.

B. Configure a static domain on the subordinate switch and reboot the switch.

C. Enable the FICON feature on the affected VSAN.

D. Configure IVR NAT on the affected VSAN.

A storage network engineer is upgrading a Cisco MDS Director with dual supervisor modules. The install command is executed on the standby supervisor module but fails. Which action would have prevented this failure?

A. All FCoE interfaces configured on the MDS must be shut down before starting the upgrade.

B. The upgrade must be done on the active supervisor module only.

C. Cisco Fabric Services must be disabled before starting the upgrade.

D. Fabric Controller Service must be stopped before starting the upgrade.