301A Online Practice Questions and Answers

An LTM Specialist needs to provide access to a 8BG-IP to device for a company's support person access to the BIG IP device, but are NOT allowed to change any settings All support the support remote access to the BIG-IP device, but are NOT allowed to change ant settings. All support have accounts in the company's Active Directory Which method is appropriate to provide access for the support personnel to the BIG-JP device?

A. configure remote authentication for all users with a default user role of Guest

B. configure remote authentication and map support personnel users to the Guest user role

C. configure remote authentication and map support personnel users to the Operator user role

D. configure remote authentication for all users with a default user role of Operator

Refer to the exhibit.

An LTM Specialist has multiple SNAT and virtual server objects configured as in the bigip.conf shown. The LTM Specialist tests a connection from a client with. IP 172.163.31.11 to 192.168.0.100:80. Which two objects will show an increase in Local Traffic statistics connections?

A. VS_AandSNAT_B

B. VS_BandSNAT_B

C. VS_ B and SNAT A

D. VS_A and SNAT A

AN LTM Specialist is setting up a new HTTPS virtual server to decrypt client traffic. SNAT the traffic and send the encrypted traffic to the poor member, the client's IP address must be included in the traffic sent to the pool member. What is a complete set of profiles that must be configured for the virtual server to meet these requirements?

A. TCP, Client SSL, Server SSL

B. TCP , Server SSL, HTTP

C. TCP, Client SSL, HTTP

D. TCP, Client SSL, Server SSL, HTTP

An LTM Specialist has recently taken over administration or an LTM device that has experienced resource availability issues. The LTM device will need to be solely used for load balancing and SSL offload. Previously, the LTM device was also used to provide statistical analysis of application traffic. However, that functionality has been moved to a third party solution. Based on the output below, which configuration change should be made to ensure the LTM module receives the most amount of resources?

A. Provision AVR to Minimum. Provision LTM at Maximum

B. Provision AVR to none. Provision LTM to Dedicated

C. Provision AVR to Minimum, Provision LTM to Dedicated

D. Provision LTM to Dedicated, Provision AVR to Dedicated

A pool has four members. Ail of the servers have been designed and configured with the same application. Each client's request can significantly the performance of the servers. Which load balancing method should the LTM Specialist use to maintain a relatively even load across all servers?

A. Least Connections

B. Priority Group

C. Ratio

D. Observed

An LTM Specialist must reconfigure a BIG-IP LTM system that load balances traffic to web application

servers. The application developer inform the LTM Specialist that TLS must be used to communicate with

the application servers.

Which additional profile is required as part of virtual server configuration?

A. SPDV profile

B. Server SSL

C. Client SSL

D. Rewrite profile

AN LTM Specialist is using an external monitor evaluate the hard drive usage of a node. The monitor has

marked the node down because it exceeded the specific threshold. The disk usage on the server has been

corrected below the threshold, however, the node remains offline.

Which feature is causing this problem?

A. The parameter Time Until UP has a value greater than 0

B. The value of Manual Resume is set to No

C. The value for UP interval is enable with a value greater than 0

D. The value for Manual Resume is set to Yes

An LTM is configure an application that is separated into several subdomains across multiple virtual servers. Many of these subdomains require encryption and could be accessed by anyone on the internet. The configuration must NOT result in SSL warnings to end users. How should the LTM Specialist configure the SSL profiles for these virtual servers?

A. Obtain an SSL certificate for each subdomain, make a ServerSSL profile for each subdomain, and apply to the related SSL Virtual Server.

B. Obtain a wildcard certificate, create one ClientSSL profile and apply to all SSL Virtual Servers

C. Create a self-singed SSL certificate for each subdomain make a ClientSSL profile for each subdomain, and apply to the related SSL Virtual server

D. Create a self-singed SSL certificate for each subdomain make a Client profile for each SSL Virtual Server

An LTM Specialist needs to create a pool with a set of monitor that checks both the pool members and corresponding application service ports. The pool members have services on port 80. The application service is on port 8009. The LTM device should load balance traffic to the pool member when the pool member and corresponding application service pass monitor. Which monitor and parameter set meets this requirement?

A. TCP monitor for port* Plus a custom TCP monitor with alias port 8009, And the pool's availability requirements set to the ALL

B. TCP monitor for port Plus a ustom TCP monitor with alias port 8009, And the pool's availability requirement set to All

C. TCP monitor for port* Plus a custom TCP monitor with alias port 8009 And the pool `s availability requirement set to 1.

D. TCP monitor for port Plus a custom TCP monitor with alias port 80 And the pool's availability requirement set to ALL

An LTM device an application that requires all connections to be secured via SSL The device must verify that request contain a specific cookie before allowing the request to be sent to the pool member. Which virtual server type should an LTM Specialist configure on the LTM device?

A. Stateless

B. Performance (HTTP)

C. Standard

D. Performance (Layer 4)

E. Forwarding (IP)