Which issue causes slips on a PRI?
A. incorrect clock source
B. incorrect encapsulation
C. incorrectly configured time zone
D. change in the line code
Which description of the function of call handlers in Cisco Unity Connection is true?
A. They answer calls, take messages, and provide menus of options.
B. They provide access to a corporate directory by playing an audio list that users and outside callers use to reach users and leave messages.
C. They collect information from callers by playing a series of questions and recording the answers.
D. They control outgoing calls by allowing you to specify the numbers that Cisco Unity Connection can dial to transfer calls, notify users of messages, and deliver faxes.
In a Cisco Unified Communications Manager design where +E.164 destinations are populated in directory entries, which call routing practice is critical to prevent unnecessary toll charges caused by internal calls routed through the PSTN?
A. forced on-net routing
B. automated alternate routing
C. forced authorization codes
D. client matter codes
E. tail-end hop-off
When configuring Cisco Unified Communications Manager, which configuration enables phones to automatically register to a Cisco Unified Communications publisher when the connection to the subscriber is lost?
A. Cisco Unified CM Group
B. Device Pool
C. SRST
D. Route Group
An engineer configures a new phone in Cisco UCM The phone boots and gets IP when it connects to the network, however the phone fails to register With CISCO UCM, The engineer observes that the phone has a status Rejected In CISCO UCM
What must be verified first Mien troubleshooting the issue?
A. whether auto-registration is enabled in Cisco UCM
B. whether the Initial Trust List and Certificate Trust List files on the phone are correct
C. whether the phone ts in the correct VLAN
D. whether the phone's MAC address is correct In Cisco UCM
Refer to the exhibit. An engineer is confining class of control for a user in Cisco UCM. Which change will ensure that the user is unable to call 2143?

A. Change line partition to Partition_A
B. Change line CSS to only contain Partition_B
C. Set the user's line CSS to
D. Set the users device CSS to
A customer asked to integrate Unity Connection with Cisco UCM using SIP protocol Which two features must be enabled on SIP security profiles? (Choose two)
A. Accept presence subscription
B. Enable application level authorization.
C. Allow charging header
D. Accept replaces header
E. Accept unsolicited notification
Refer to the exhibit.

An engineer is troubleshooting an NTP synchronization issue that returns a message of "unsynchronized' when the utils ntp status command is run on the Cisco UCM subscriber node. The connectivity between the subscriber and the NTP server was verified as working, and the NTP server is running. Which action resolves the issue?
A. Add an additional NTP server on the Cisco UCM subscriber node.
B. Add an additional NTP server to the Cisco UCM publisher node.
C. Ensure that the Cisco UCM subscriber node is running.
D. Ensure that the Cisco UCM publisher node is up and running.
Refer to the exhibit.

Which troubleshooting step must be performed to investigate the issue?
A. Check the calling privileges of the line and device.
B. Restart the Cisco CallManager service on all nodes.
C. Reset the destination SIP trunk in Cisco UCM.
D. Reset the phone being called in Cisco UCM.
What an advantage of using of the SIP OAuth mode in Cisco Jabber?
A. usage of self-signed certificates
B. secure signaling and media
C. authentication of SIP messages
D. reduced authentication times