500-220 Online Practice Questions and Answers

Which design requirement is met by implementing syslog versus SNMP?

A. when automation capabilities are needed

B. when proactive alerts for critical events must be generated

C. when organization-wide information must be collected

D. when information such as flows and client connectivity must be gathered

Refer to the exhibit. What does the MX Security Appliance send to determine whether VPN traffic exceeds the configured latency threshold in the VoIP custom performance class?

A. 1000-byte TCP probes every second, through VPN tunnels that are established over the primary WAN link.

B. 100-byte UDP probes every second, through VPN tunnels that are established over every WAN link.

C. 100-byte UDP probes every second, through VPN tunnels that are established over the primary WAN link.

D. 1000-byte TCP probes every second, through VPN tunnels that are established over every WAN link.

What is a feature of distributed Layer 3 roaming?

A. An MX Security Appliance is not required as a concentrator.

B. An MX Security Appliance is required as a concentrator.

C. All wireless client traffic can be split-tunneled.

D. All wireless client traffic is tunneled.

A customer wants to use Microsoft Azure to host corporate application servers.

Which feature does the customer get by using a vMX appliance rather than connecting directly to Azure by VPN?

A. malware protection

B. SD-WAN

C. next-generation firewall

D. intrusion prevention

When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?

A. Content filtering

B. Bridge mode

C. 802.11r

D. Dual band operating with Band Steering

How does a Meraki device behave if cloud connectivity is temporarily lost?

A. The offline device continues to run with its last known configuration until cloud connectivity is restored.

B. The offline device reboots every 5 minutes until connection is restored.

C. The offline device stops passing traffic.

D. The offline device tries to form a connection with a local backup sever.

Refer to the exhibit. During a Meraki AP deployment, the default SSID that the exhibit shows is broadcast. What causes this behavior?

A. An AP does not have a wired connection to the network.

B. An AP cannot connect to the default gateway.

C. An AP has never connected to the Meraki Cloud Controller.

D. An AP has Site Survey mode enabled.

Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?

A. MS Switch

B. Meraki Insight

C. MR Access Point

D. MV Smart Camera

A new application needs to be pushed to all iOS devices. Some devices report "NotNow" in the event log and do not install the application. What does the "NotNow" event indicate?

A. The application requires the most recent iOS version.

B. The device is locked with a passcode.

C. The device cannot connect to Apple servers.

D. The device cannot connect to Cisco Meraki servers.

Which information is used to calculate whether a WAN link has high usage?

A. data under Security and SD WAN > Appliance Status > Uplink > Live Data

B. total historical throughput of an uplink

C. total number of devices that are actively passing traffic

D. value under Security and SD WAN > SD WAN and Traffic Shaping > Uplink Configuration