VMware 5V0-22.21 Exam Questions & Answers

Which two requirements should the vSAN administrator consider in order to accomplish this goal? (Choose two.)

A. A leaf spine topology is required for core redundancy and reduced latency.

B. NIC teaming must be implemented for the vSAN network vmkernel port.

C. The configuration must meet the same latency and bandwidth requirement as local vSAN.

D. Encryption must be disabled prior to configuring HCI mesh.

E. Either Layer 2 and Layer 3 communications can be used.

An administrator is responsible for managing a 5-node vSAN 7.0 cluster that hosts 150 virtual machines.

Each virtual machine belongs to one of the following vSAN Storage Policies:

vSANPolicy1:

Site Disaster Tolerance: None

Failures to Tolerate: 1 failure - RAIN5 (Erase Coding)

vSANPolicy2:

Site Disaster Tolerance: None

Failures to Tolerate: No data redundancy

Following an unplanned power event within the datacenter, the administrator has been alerted to the fact

that one host has permanently failed. Prior to the vSAN host failure, the usable storage capacity of the

vSAN Cluster was more than 40%.

What will be the potential impact to any virtual machine that was running on the failed host using

vSANPolicy2?

A. vSAN will immediately start the recovery process.

B. Each virtual machine will be restarted on another vSAN host using vSphere HA.

C. After 60 minutes, vSAN will automatically start the recovery process.

D. Each virtual machine will need to be restored from backup.

A vSAN administrator is tasked to perform an upgrade of a vSAN cluster from 7.0 to 7.0 U2, including firmware and drivers for its hardware. The vSAN administrator already created an image using vSphere Lifecycle Manager (vLCM).

Prior to selecting Start Remediation, which step should be taken to upgrade the complete vSAN cluster as a single task?

A. Select Remediate All through vLCM to upgrade all hosts in the cluster.

B. Manually remediate one host at a time in the vSAN cluster.

C. Place all hosts in the vSAN cluster into Maintenance Mode.

D. Stage the upgrade of the vSAN cluster through vLCM.