ASVAB-SECTION-4 Online Practice Questions and Answers

A bent frame causes __________.

A. improper tracking

B. auto accidents

C. poor ride

D. excessive rust

The best chisel to use when making a circular cut in metal is a __________.

A. cold chisel

B. socket chisel

C. butt chisel

D. round chisel

An Allen wrench __________.

A. is made exclusively by the Allen Manufacturing Company, LLC.

B. fits all kinds of screws.

C. fits screws with an octagonal recess in the head.

D. fits screws with a hexagonal recess in the head.

A groover is used to __________.

A. lock seams together.

B. make sheet metal seams.

C. open a seam.

D. fold a seam.

If a driver inserts the key to start his car and finds that it does not work, then there is a problem with the ignition system.

Seeing that the car has a full tank of gas, the next logical thing to do is __________.

A. replace the gas in the gas tank immediately

B. call a tow truck since there is no possible way of moving the car at that point

C. check the batteries by turning on the lights or radio

D. check to see if the wheels are flat

The fastening tool used to turn nuts and bolts is called a __________.

A. mallet

B. hammer

C. stapler

D. wrench

The cold chisel called "cold" because __________.

A. it can cut metal without the need for a heat source

B. it is used in areas with colder temperatures

C. it is used to cut through giant blocks of ice

D. it is used to cut cold metal only

The twisting force that causes rotation is properly referred to as __________.

A. energy

B. horsepower

C. MPH

D. torque

Talking about the radiator, it is more common for a car to overheat during hot days than on cold days because __________.

A. with direct sunlight, the cooling system does not work

B. the air that is supposed to cool the fluid or the coolant that flows through the radiator is not cool enough to do the job, hence overheating can happen

C. the radiator automatically shuts off when the outside temperature is too high

D. hot days have the tendency to melt the radiator

Which type of saw is designed to make accurate crosscuts at specific angles?

A. Miter saw

B. Swing saw

C. Rip saw

D. Pad saw