D-UN-DY-23 Online Practice Questions and Answers

Correct Answer: D

Packet Reflect is a feature that enables the Dell Unity XT system to use the same interface for outbound communication that was used for inbound communication. This feature is useful when the Dell Unity XT system needs to initiate outbound traffic to an external service, such as DNS, NTP, LDAP, or SMTP. By using Packet Reflect, the Dell Unity XT system can avoid routing issues, firewall restrictions, or network address translation problems that may occur when using a different interface for outbound communication. When a NAS server starts outbound traffic to an external service, the Dell Unity XT system uses Packet Reflect to send the packets through the same interface that received the packets from the external service. Therefore, the correct answer is D. Uses Packet Reflect for outbound communication. References: Dell EMC Unity: NAS Capabilities Dell EMC Unity: Unisphere Overview

Correct Answer: B

To meet the requirements, the replication connection mode must be set to Both, which allows both synchronous and asynchronous replication sessions to be configured on the same connection. This way, block resources can use synchronous replication, which ensures zero data loss, and file resources can use asynchronous replication, which allows some data difference on the destination. Setting Unisphere resource filtering to All is not necessary, as it only affects the display of resources in the Unisphere GUI. Setting an RPO of 0 on the synchronous replication sessions is redundant, as synchronous replication always has an RPO of 0. Configuring the replication interfaces on the 4-port mezzanine card is not relevant, as it only affects the performance and availability of the replication network. References: [Dell EMC Unity: Replication Technologies], [Dell EMC Unity: Unisphere Overview]

Correct Answer: CE

A Host Group is a logical grouping of hosts that share the same access permissions to storage objects, such as LUNs, VMFS Datastores, or NFS Filesystems. By configuring a Host Group, an administrator can simplify the management of multiple hosts and ensure consistent access to the storage resources. Some of the benefits of using a Host Group are: Provides multiple hosts access to the same VMFS Datastores: A VMFS Datastore is a block-based storage object that is formatted with the VMware File System (VMFS) and used to store virtual machine files. A VMFS Datastore can be shared by multiple hosts that are part of a VMware cluster. By adding these hosts to a Host Group and assigning the VMFS Datastore to the Host Group, the administrator can ensure that all the hosts have the same access permissions and can access the virtual machines on the Datastore. Provides multiple hosts access to the same LUNs: A LUN is a block-based storage object that is presented to a host as a SCSI device. A LUN can be shared by multiple hosts that have the same operating system and use a cluster-aware file system. By adding these hosts to a Host Group and assigning the LUN to the Host Group, the administrator can ensure that all the hosts have the same access permissions and can access the data on the LUN. References: Dell EMC Unity: Host Configuration Dell EMC Unity: VMware ESXi Hosts and Clusters

Correct Answer: AC

Two ways to create an asynchronous replication session for a NAS server are to use NAS server properties and to use the NAS server wizard. Both methods allow the user to select a source NAS server and a destination NAS server, and

configure the replication settings, such as the RPO, the replication schedule, and the replication mode. Creating a replication connection or a replication interface are not ways to create an asynchronous replication session for a NAS server,

but rather prerequisites for enabling replication between two Dell Unity systems.

References: [Dell EMC Unity: Replication Technologies], [Dell EMC Unity: NAS Capabilities]

Correct Answer: C

The maximum number of replicated NAS servers supported for the Dell Unity XT 380 series in an asynchronous replication is 126. This is the same as the maximum number of NAS servers supported for the Dell Unity XT 380 series in

general. Asynchronous replication is a method of replicating data between two Dell Unity systems with a configurable recovery point objective (RPO). It allows the source system to continue normal operations without waiting for the destination

system to acknowledge the completion of the replication.

References: [Dell EMC Unity: Replication Technologies], [Dell EMC Unity: NAS Capabilities]

Correct Answer: C

The firewall ports that are required to be open for a successful outbound connection when configuring integrated secure connect gateway are 443 and 8443. Integrated secure connect gateway is a feature that enables secure remote access

to the Dell Unity system through the Unisphere Central web portal. It requires an outbound connection from the Dell Unity system to the Unisphere Central server over the internet. Port 443 is used for HTTPS communication and port 8443 is

used for WebSocket communication.

References: [Dell EMC Unity: Unisphere Overview], [Dell EMC Unity: Integrated Secure Connect Gateway]

Correct Answer: A

The service task that the administrator should perform to fix the issue with minimal impact is Restart Management Software. This service task restarts the management software on both storage processors without affecting the data services or the host I/O. This can resolve the communication issues between Unisphere and the storage system. Reinitialize, Enable SSH, and Reboot Storage Processor are service tasks that have more impact and risk than Restart Management Software. References: [Dell EMC Unity: Unisphere Overview], [Dell EMC Unity: Service Tasks]

Correct Answer: C

To expand a dynamic pool, the number of drives added must be equal to or greater than the stripe width of the pool. The stripe width is the number of data drives plus the number of parity drives in a RAID group. In this case, the stripe width is 12 + 1 =

13. Therefore, the minimum number of drives needed for the pool expansion is

13. References: Dell EMC Unity: Dynamic Pools Technical White Paper1, page 8.

Correct Answer: D

A drive partnership group is a collection of drives of the same drive type that have been combined into a hidden dynamic pool object. Each drive within a dynamic pool can only be part of a single drive partnership group, and a drive will never change the drive partnership group. The maximum size of a drive partnership group is 32 drives, regardless of the drive type or size. When expanding a dynamic pool, the system will automatically create new drive partnership groups as needed, and distribute the drives evenly across the groups. The number of drive partnership groups in a dynamic pool is equal to the number of drives divided by 32, rounded up to the nearest integer. References: Dell Unity: Dynamic Pools2, page 5.

Correct Answer: B

When Advanced Deduplication is disabled on a LUN, the existing data that was deduplicated remains in its reduced state, and only new data written to the LUN is not deduplicated. To remove the Advanced Deduplication savings from the LUN, the administrator must perform a Local LUN Move operation, which copies the data from the source LUN to a destination LUN without deduplication. The destination LUN must have Advanced Deduplication disabled, and must be in the same storage pool as the source LUN. After the Local LUN Move is completed, the source LUN can be deleted and the destination LUN can be renamed as the original LUN. References: Dell Unity: Data Reduction2, page 9.