DC0-200 Online Practice Questions and Answers

You want half of the six hard drives in your server to be on a separate SCSI bus. How would you achieve this?

A. turn on the Split Backplane option in the PERC BIOS

B. split the backplane to a 2x4 backplane

C. add an additional processor to the server

D. split the backplane to a 1x3 backplane

The system administrator of a mixed network environment consisting of both Microsoft Windows 2000 and Red Hat Linux wants to take advantage of the embedded NICs on the PowerEdge 2650 servers for network load balancing. Which scenario would work ?

A. You cannot configure network load balancing in multiple Network Operating Systems.

B. configure Windows 2000 servers to use IPX and Linux servers to use IP

C. configure Windows 2000 servers to use IP and Linux servers to use IP

D. configure Windows 2000 servers to use IP and IPX and Linux servers to use IP and IPX

Which two are needed to update the ESM on a PowerEdge server? (Choose two.)

A. Windows 9x bootable floppy

B. Windows NT fault-tolerant boot floppy

C. the ESMFLASH utility

D. the SMFLASH utility

Which three tasks can be accomplished using the System Setup Utility of a Dell PowerEdge Server? (Choose three.)

A. enable the SCSI/RAID controller

B. change the boot order

C. change the Asset Tag information

D. enable or disable all integrated devices in the system

Which three requirements must you meet to install OMSA in a Red Hat Linux environment? (Choose three.)

A. You must do a custom installation to support Linux.

B. The running kernel must have loadable module support enabled.

C. You must purchase the Linux version of OMSA.

D. The "ucd-snmp" or "net-snmp" package that is provided with the operating system must be installed.

E. You must be logged in as root.

You are configuring a new PowerEdge 2650 that is running Windows 2000 Server. The system will be in a rack without a keyboard or monitor connected, so you want to turn off keyboard error messages. What should you do?

A. select the Do Not Report option for the Report Keyboard Errors field in the System Setup Utility

B. disable the PS/2 port in Windows 2000 Device Manager and reboot

C. boot to the Utility P artition, e xecute nokb.com before rebooting

D. rack the system, as the system will autodetect rack use and disable keyboard error reporting

Using Array Manager, what must you do when changing the drive letter of one of your volumes? (Choose two.)

A. You must find if there are program(s) installed on that volume, because changing the drive letter might render the program(s) in-executable.

B. You must ensure you are using Microsoft Windows 2000 operating system because drive letters cannot be changed using Microsoft Windows NT 4.0.

C. First you must ensure the drive letter has been removed by selecting the Remove option. The drive letter cannot be changed.

D. You must ensure the volume does not contain the boot volume.

Which four steps are necessary for creating a team in Windows 2000 using BASP? (Choose four.)

A. create a team and assign it a name

B. configure the IP address and subnet mask for the team

C. select the adapters from the list to add to the team

D. set the media type for the adapters

E. select the Broadcom Advanced Server Program Driver

F. enter the path and filename of the configuration to be saved

How do you gain access to the Utility Partition?

A. press F10 during POST

B. reboot the server from the DSA CD

C. press ALT-M during POST

D. press F2 during POST

You received an e-mail that states that a server has a warning on Fan 1. How can you determine the server status using Server Administrator? (Choose two.)

A. using telnet , log into the server and enter the status command to display the fan states

B. using OMSA, from the system tree find the fan that displays an exclamation point

C. using the Server Console, drill down to the fan to display the states

D. use an OMSA CLI command to display the status of Fan 1