DES-6321 Online Practice Questions and Answers

A system administrator wants to generate and download a log bundle from their VxRail environment. What is the correct sequence of the REST API calls accomplish this?

Select and Place:

In a VxRail Stretched Cluster built from eight all-flash nodes, what should be the recommended storage policy to ensure the highest possible protection?

A. Raid-1(Mirroring) FTT=1

B. Raid-1(Mirroring) FTT=2

C. Raid-5/6(Erasure Coding) FTT=1

D. Raid-5/6(Erasure Coding) FTT=2

What is a requirement for Top of Rack (ToR) switch VxRail node ports?

A. Enable Spanning Tree

B. Disable IGMP Snooping

C. Enable IGMP Querier

D. Disable Link Aggregation

You are asked to cable up a VxRail G Series cluster to a redundant pair of 1/10G switches. What is the cabling best practice for this configuration?

A. Cable ports 1 and 2 to oneswitch. Cable ports 3 and 4 to the other switch.

B. Cable ports 1 and 2 to one switch. Cable ports 3 and 4 to the other switch. Cable BMC from node 1 and 2 to one switch. Cable BMC from node 3 and 4 to the other switch.

C. Cable ports 1 and 3 to one switch. Cable ports 2 and 4 to the other switch.

D. Cable ports 1 and 3 to one switch. Cable ports 2 and 4 to the other switch. Cable BMC from node 1 and 3 to one switch. Cable BMC from node 2 and 4 to the other switch.

In which VxRail node model is the iDRAC `NIC Selection Setting' set to LOM1?

A. S570

B. E560

C. G410

D. G560

Which vSAN license is included with VxRail?

A. vSAN Enterprise

B. vSAN for ROBO

C. vSAN Advanced

D. vSAN Standard

A VxRail deployment has just been completed, and the performance service is enabled. The vSAN backend IOPS metrics are not available for the cluster. What is the reason for this issue?

A. Data has not been populated yet.

B. Health service has not been turned on

C. Monitoring policy has not been created

D. Performance service has not been disabled and re-enabled

In a VxRail Stretched Cluster deployment what is the required Round Trip Time (RTT) between sites?

A. Primary to Witness site RTT < 200 ms Secondary to Witness site RTT: < 200 ms Primary to Secondary site RTT; < 5 ms

B. Primary to Witness site RTT: < 250 ms Secondary to Witness site RTT: < 250 ms Primary to Secondary site RTT: < 10 ms

C. Primary to Witness site RTT: < 10 ms Secondary to Witness site RTT: < 10 ms Primary to Secondary site RTT < 6 ms

D. Primary to Witness site RTT: < 150 ms Secondary to Witness site RTT: < 150 ms Primary to Secondary site RTT < 10 ms

What are the categories that can be validated by the VxRail NVT?

A. Network Services. ToR Switches, and Upstream Switches

B. VxRail Appliance, ToR Switches, and Upstream Switches

C. ToR Switches and Upstream Switches only

D. VxRail Appliance. Network Services, and ToR Switches

A system administrator attempts to use the VxRail REST API to obtain system health status for their VxRail environment. The system returns the following error code: 401. What should the administrator do to address this issue?

A. Provide vCenter credentials with sufficient rights.

B. Connect to vCenter GUI and try the command again

C. Wait five minutes and try the command again

D. Ensure that the VxRail Manager IP is correct