E20-616 Online Practice Questions and Answers

Which set of VMAX interface types support software compression with SRDF?

A. FC and 10 GigE

B. FCoE and FC

C. 10 GigE and FCoE

D. Ficon and 10 GigE

What is the status of the R1 and R2 devices after a SRDF Split operation is performed?

A. R1 is Read-Write R2 is Read-Write

B. R1 is Read-Write R2 is Read-Only

C. R1 is Write Disabled R2 is Read-Write

D. R1 is Read-Only R2 is Read-Write

In a VMAX 20K extended drive loop configuration also known as capacity configurations, what is the maximum number of engines you can install?

A. 4

B. 2

C. 6

D. 8

A director replacement is required on VMAX 20K. The customer asks what the impact will be on the front-end ports of the director being replaced. What should your response be?

A. The front-end I/O modules will go offline.

B. The front-end I/O modules will use a redundant Virtual Matrix.

C. The front-end I/O modules will use redundant SIB.

D. The front-end I/O modules will remain online.

You are replacing Symmetrix FRUs.

Which tool/ procedure must be followed before carrying out this activity?

A. ESD

B. Alum-a-lift

C. ESRS

D. ELM

You are installing a new VMAX 20K for a customer. You need to download the license file and you log onto http://support.emc.com to retrieve it.

What do you need to know about the License Activation Code (LAC) name to retrieve the license file?

A. The name includes the VMAX Serial Number

B. The name is identical to the site id

C. The name is identical to the current date

D. The name is a combination of the site id and the Serial Number

Starting with which microcode level requires you to have a secure logon ID in order to operate the Service Processor?

A. 5772

B. 5876

C. 5875

D. 5773

You are configuring a VMAX 40K for an Open Sytems host. Where can you find the current VMAX 40K Simple Support Matrix?

A. ELab Navigator

B. Powerlink

C. GS SSR web site

D. Primus server

Refer to the Exhibit.

While configuring a Multi-Engine VMAX 20K, the CE is connecting Engine numbers 4 and 5 with cables. What is the type and sequence of connections required to connect the Lowest Engine number?

A. Purple Cable; connects F to G and H to 3

B. Green Cable; connects F to G and H to 3

C. Purple Cable; connects F to G and E to 3

D. Green Cable; connects F to G and E to 3

Refer to the exhibit.

A customer would like to have dynamic SRDF target volumes which cannot be swapped. From the illustration shown, what would you select?

A. DR2

B. DRX

C. R2

D. DR1