E22-285 Online Practice Questions and Answers

Which VxRail node type supports only hybrid storage?

A. S Series

B. E Series

C. G Series

D. V Series

What is a consideration for using link aggregation on the Top of Rack (ToR) switch for a VxRail?

A. Should not be used for VxRail node ports, but can be used for uplink and ISL

B. Is not supported on the VxRail ToR switch

C. Can be configured for any connectivity, but are not required

D. Should always be configured for VxRail node ports to allow for failover

Which integrated backup solution is included with VxRail at no additional cost?

A. Dell EMC Data Protection Suite

B. VMware vSphere Data Protection

C. VMware VM Snapshots

D. Dell EMC NetWorker

Which VxRail Pre-Installation Site Checklist worksheet is auto-populated?

A. Network Basics

B. Switch Config Actuals

C. VxRail Network Configuration

D. Begin Here

What accurately describes the positioning of a VxRail?

A. Can start small and grow with a low entry cost

B. Software defined solution with rack scale and integrated networking

C. Can start small and grow to hundreds of nodes

D. Converged architecture with enterprise grade resiliency

A company has a two chassis G Series cluster and wants to change the setup. This will require a reset of

the chassis.

What is the correct procedure?

A. Reset both chassis simultaneously through the reset script

B. Reset the primary chassis first, followed by the secondary chassis, through the reset script.

C. Reset both chassis simultaneously with the mobile build server

D. Reset the secondary chassis first, followed by the primary chassis, through the reset script.

A workstation is being configured on the management VLAN (10.150.140.0/24) to connect to VxRail Manager for first time deployment. Configuring which IP addresses on the workstation will result in a successful deployment without having to change them during initialization?

A. 192.168.1.199 and 10.150.140.100

B. 192.168.1.250 and 10.150.140.255

C. 192.168.10.199 and 10.150.140.255

D. 192.168.10.250 and 10.150.140.250

In a VxRail external vCenter deployment, which component(s) are automatically licensed?

A. vCenter only

B. vCenter and vSAN

C. None

D. vSAN only

You have been asked to deploy a single, 4 node VxRail cluster for company. They would like to perform an online migration from their existing vSphere 6.0u2 environment. They have also asked that vCenter Enhanced linked-mode be supported. Based on best practice, what is the recommended deployment model?

A. Use existing vCenter with External PSC

B. Deploy Internal vCenter with External PSC

C. Use existing vCenter with Embedded PSC

D. Deploy Internal vCenter with Embedded PSC

Which step of the VxRail Initialization wizard may time out if the user does not proceed to the next step within 20 minutes?

A. Build complete screen

B. Review expected nodes list

C. Review and validate

D. Configuration of the VxRail Manager IP address