HP0-J65 Online Practice Questions and Answers

Which HP Service tool performs an operating system binary event log analysis?

A. ISEE

B. WEBES

C. RISS

D. OSEM

Which statements are true about the 8/20q Fibre Channel switch? (Select two.)

A. It can only be used as an edge switch.

B. It supports plug-and-play compatibility.

C. It supports multi-switch networks with up to 6 switches and 3 hops.

D. It supports only SFP8 transceivers.

E. It has a base of 12 ports enabled, with 4-port increments.

Which SAN component product provides network fault isolation?

A. 8Gbs SFP

B. Brocade MPR400

C. Emulexfibre channel HBA

D. IP Distance Gateway

The HP SAN design philosophy meets a range of storage system requirement. What does it provides? (Select two)

A. incremental scaling

B. a comprehensive list of compatible products

C. a migration methodology

D. a way to implement HP technology

E. greater flexibility

When configuring interoperable fabrics, which timing variables need to match across the fabric using the default setting?

A. B_B_TOV and R_B_TOV

B. R_B_TOV and B_D_TOV

C. R_A_TOV and B_B_TOV

D. E_D_TOV and R_A_TOV

In a single fabric, when multiple paths exist between a host and its storage, which statement is true?

A. The path used is determined by port priority.

B. The result could be an unstable fabric.

C. The FSPF protocol determines best route.

D. Load sharing is automatically set to static.

What should be done in preparing the SAN for production to help minimize risk and maximize the probability of success?

A. thoroughly test individual components before deployment

B. determine the number of fabric zones required to support your environment

C. utilize fibre channel switches from only one vendor

D. deploy in phases

Caution should be used with the switch command cfgclear. It clears the _____.

A. zoning configuration for the entire fabric

B. zoning configuration only on the switch where issued

C. World Wide Name on all switches in the fabric

D. interswitch routing table

What can you do to minimize communication delays between a host and its storage subsystem?

A. ensure there is at least one switch hop

B. configure a maximum of four active host ports per ISL

C. cross couple multiple ISLs

D. connect the two devices to the same switch

You are designing a new SAN fabric for a customer environment. The customer wants to ensure that the design provides maximum performance for local data access, while supporting occasional centralized data access. Which fibre Channel topology should you recommend?

A. meshed

B. core-edge

C. ring

D. cascaded