HPE0-J76 Online Practice Questions and Answers

A customer wants you to expand an HPE StoreVirtual cluster with two additional nodes. What do you need to consider?

A. The new nodes must be configured into a new management group.

B. The firmware of the new nodes must match the version running in the cluster before adding them.

C. Nodes must be of equal or greater capacity compared to the existing nodes in a cluster.

D. The expansion needs downtime to re-balance the resources within the cluster.

You need to configure an HPE 3PAR StoreServ to provide 16 Gb/s host connectivity, peer motion capabilities, and FCoE/iSCSI. Which configuration satisfies these requirements?

A. HPE 3PAR 8200 2-node with 4-port 16 Gb/s Fibre Channel Cards

B. HPE 3PAR 8400 4-node with 2-port 1SCSI/FC0E and 4-port 16 Gb/s Fibre Channel Cards

C. HPE 3PAR 8200 2-node with 2-port 1SCSI/FC0E and 4-port 16 Gb/s Fibre Channel Cards

D. HPE 3PAR 8400 2-node with 2-port iSCSI/FCoE and 4-port 16 Gb/s Fibre Channel Cards

Which area of IT management is covered when integrating HPE Operations Orchestration into a solution?

A. managing hybrid cloud environments arid IT services

B. automating and coordinating IT processes

C. simplifying management and control of the data center

D. delivering high-quality mottle applications

A customer requires a new HPE 3PAR StoreServ 840O-2N with me minimum number of drive enclosures to support Enclosure HA with 96 x 1.2 TB 10 K SAS drives, as well as a physical service processor. The customer has their own data center racks with 9 U of space left for the new array.

What should you do to comply with the installation best practices?

A. Move the service processor to a separate rack.

B. Have the customer plan for an additional rack.

C. Add a rack air flow optimization kit to the solution.

D. Install the array at the bottom of the rack.

A customer adds additional SSD drives to an HPE 3PAR StoreServ array configured with Adaptive Flash Cache (AFC). Which action is needed to take advantage of the new drives in AFC?

A. Remove the old AFC configuration and recreate a new one.

B. Run tunesys after adding the drives to rebalance the system.

C. Run the statcache command to enable AFC for all Ws on the system.

D. Increase the current AFC configuration to reflect the additional space.

Which tasks should you perform during the prepare and interview stages of a consulting engagement? (Select two.)

A. Design the solution mat meets the customer's needs and conveys value.

B. Determine who to add to your team to produce a winning proposal.

C. Listen to what the customer has to say.

D. Determine which solutions are closely aligned with the customer's business needs.

E. Research the company and people, and discover areas of concern.

Which additional is functionality is offered in an HPE SPAR StoreServ 8000 system when compared to an HPE 3PAR StoreServ 7000 system?

A. HPE 3PAR Online import license

B. HPE 3PAR Data at Rest Encryption

C. HPE 3PAR Adaptive Optimization and Dynamic Optimization

D. HPE 3PAR Persistent Checksum end-to-end data integrity

Which SAN topologies offer the highest centralized data access performance? {Select two.)

A. single switch

B. cascaded

C. meshed

D. ring

E. core-edge

You are designing a new SAN fabric for a customer who requires a high performance and port-efficient network with many-to-marry connectivity. Which type of SAN topology should you recommend?

A. core-edge fabric

B. cascaded fabric

C. meshed fabric

D. single-switch fabric

You design a new HPE 3PAR StoreServ solution that will be integrated with existing c- Class blade enclosures that have flat SAN technology. Which solution component should you discuss with the company CFO?

A. HPE teasing program

B. I/O performance metrics

C. advantages of Proactive Care Advanced over Proactive Care

D. benefits of removing me edge-core architecture