HPE3-U01 Online Practice Questions and Answers

Exhibit:

What are valid configurable "Client VLAN Assignment" options for a Bridge-based WLAN in Aruba Central? (Select three.)

A. native VLAN

B. automatic VLAN

C. hybrid VLAN

D. static VLAN

The PCs are not able to successfully establish bidirectional communication. What change must you deploy to enable the communication between PC-1 and PC-2?

A. change PC-1 's default gateway to 172.16.30.2

B. change PC-1's IP address to 172.16.30.10

C. change the Router's 1/1/1 interface IP to 172.16.30.254

D. change PC-2's default gateway to 172.16.31.254

Which command should you enter to access the second interface of a one-rack-unit standalone ArubaOS-CX switch?

A. Interface 0/0/2

B. Interface 1/0/2

C. Interface 1/1/2

D. Interface 0/1/2

On which connection type are collisions more likely to happen?

A. Dark Fiber

B. Fiber

C. Copper

D. Wi-Fi

PC-1 is sending a packet to PC-2. What are the Layer 2 and Layer 3 source addresses of the message when it is received by PC-2? (Select two.)

A. source MAC is 90:20:C2:BC:2D:FD

B. destination MAC is 88:77:24:97:A1:D2

C. source IP is 10.2.1.10

D. source MAC is 00:50:56:B1:94:9F

E. source IP is 10.2.2.1

What is the decimal equivalent of the binary number 10001010?

A. 138

B. 198

C. 108

D. 89

What are the differences between Local-based and Server-based management? (Select two.)

A. server-based management cannot talk to the device's control plane, local-based can

B. in local-based, the managed device is a client, while in server-based it is a server

C. local-based management can use the device's console port, server-based cannot

D. local-based management requires an on-premises network management appliance

E. server-based management can monitor multiple devices at once, local-based cannot

WhichOSImodel layer is in charge of creating data?

A. Physical

B. Transport

C. Layer 4

D. Layer 7

Which protocols operate on the Management Plane? (Select two.)

A. Transmission Control Protocol

B. Address Resolution Protocol

C. Spanning Tree Protocol

D. Hypertext Transfer Protocol Secure

E. Secure Shell

What are the key differences between L2 switches and routers? (Select two.)

A. Switches build an ARP table, while routers build a port table.

B. Switches build a MAC table while routers build a routing table.

C. Switches are considered L2 devices, while routers are L4.

D. Switches offer a considerably higher port density than routers.

E. Routers offer a considerably higher port density than switches.