MB-320 Online Practice Questions and Answers
A company produces pipe at certain fixed lengths.
The company must be able to schedule cutting machines. You set up the cutting machines as resources. All cutting resources can produce many of the products. There are some products that require cutting machines that can produce longer
lengths of product. Only some of the machines can do this.
You need to configure the resources to account for these different products.
What should you do?
A. Configure the Data/Hour option on the Capacity unit field on the resource.
B. Build capability related to length and assign to the appropriate resources.
C. Create a resource group for each length.
D. Create a resource for each length.
A customer produces light projection toys for holiday decorations throughout the year. Vendors have negotiated rebate agreements as a condition of their contact. The contract also contains the visual templates required for the customer to use in a season.
Vendor rebate agreements must only be applied if the following requirements are met:
1.
Units of measure for deliverables are the same unit of measure as on the agreement
2.
The agreement is valid as of the date a purchase order is generated
You need to configure the vendor rebate agreements.
What should you do?
A. Set the Rebate line break type field value to Amount
B. Set the Rebate line break type field value to Quantity
C. Set the Cumulative purchase by field value to the beginning of the season date
D. Set the Unit of measure rebate option field value to Exact match
You are the lead product design engineer at a plastics manufacturing company. You implement a new process that uses a single tool to produce three finished goods at the same time.
You need to set up the planning item number and formula to correctly to manufacture the three items.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Create item number for planning item and the associated formula
B. Add minimum and maximum quantities on formula
C. Add a coverage group to the formula
D. Assign co-products to the formula
E. Specify each of the finished good items as co-products
Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A manufacturing plant uses batch tracking of raw materials, semi-finished goods, and finished goods.
It is difficult to determine when semi-finished and finished goods were produced and expired.
You need to incorporate automatic batch expiration dates for tracked items that are produced.
Solution:
1.
Assign shelf life period in days to the items that require expiration dates.
2.
Create a new reservation hierarchy that places batch at one.
3.
Assign the new reservation hierarchy to the items that require expiration dates. Does the solution meet the goal?
A. Yes
B. No
A company plans to use master planning in Dynamics 365 Supply Cha-n Management. The company will sell items between legal entities.
The company has several facilities across legal entities that can manufacture the same products- Some products are produced only in some plants. To meet product demand, when one facility rs over capacity, another facility is used to fulfill the downstream demand.
The organizational entities are: Legal Entity A: Plant 1,2, and 3 Legal Entity B: Plant 4 and S Legal Entity C: Plant 6. 7. and 8
The following plants must be planned together Plan1, Plant 3, and Plant 4 Plant 2, Plant 6, and Plant 8 Plant 5 and Plant 7
You need to configure master planning for the facilities. Which configuration mechanism should you use?
A. Intercompany planning groups
B. Coverage groups
C. Item model groups
D. Production groups
You need to enable the features and configuration keys for the firepits.
Which two features should you enable? Each answer presents part of the solution.
NOTE: Each correct selection is worth one point
A. Engineering attributes
B. Change management for process manufacturing
C. Engineering product variants
D. Engineering change management
E. Production floor execution management
You use the master planning module for Dynamics 365 Supply Chain Management.
Planned production orders have been created.
Several sales orders are canceled in response to concerns about recent online reviews of a product.
You need to enable the appropriate action message.
Which action message should you enable?
A. Increase
B. Decrease
C. Advance
D. Postpone
E. Derived actions
Background
Adventure Works Cycles is a high-end bicycle manufacturer in North America. Their standard model bicycles are available year-round. Limited-edition bicycle models are released several times a year to boutique retailers domestically. Adventure Works has had the most success with their limited-edition bicycles. These bicycles have high margins, are in high demand, and have a strong following with the younger generation biking community.
Current environment General
Adventure Works expects to triple their manufacturing capabilities in the next few years due to increasing demand. The company plans to invest in Dynamics 365 Finance, Dynamics 365 Supply Chain Management, and the Power Platform
products to migrate from a custom-built enterprise resource planning (ERP) solution and Microsoft Excel worksheets.
Adventure Works sells only to the United States and Canada. Despite their limited market, they cannot keep up with current demand. Over time, they want to expand their market to remain profitable.
Adventure Works has no capabilities or budget to undertake any development beyond Excel formula-level tasks.
Bicycle manufacturing
1.
Bicycle models are measured and reported against how well a single model performs as a sum of all the variations of that model. For example, the Street Kid YOLO model sold 25,000 units in 2019 across all variations of the product, but the Purple Female frame made up 30 percent of that model's sales.
2.
The Street Kid YOLO models sell in different volumes depending on the market.
3.
The creation of production orders for bicycles occurs monthly and is based on historical sales.
4.
Each part of a bicycle's assembly occurs at a different station in the Adventure Works production facility.
5.
A piece of paper that has eight sections accompanies a bicycle throughout the manufacturing process. As each step is completed, the respective section is completed and signed off by a production worker.
6.
The completed paper is used in the put-away process by the warehouse workers.
Financials
1.
The standard model and limited-edition bicycle teams are separate operating units within the manufacturing division. Financials are tracked and reported separately even though they are produced and sold in the same sales channels.
2.
Updates to the standard model bicycle models are created when a part for a bicycle becomes unavailable. This can change the cost of the product.
3.
An updated model of a bicycle with new parts will be maintained as a new item and have a new price. However, it will look like the exact same product to retailers and distributors.
Manufacturing process
The bicycle manufacturing process is shown in the following graphic:
Limited-edition bicycle process
The limited-edition bicycles are made up of an Adventure Works custom frame with all other parts created by local artists and manufacturers.
1.
Each bicycle has a unique set of new items that make up the bill of materials (BOM) because all parts are created to specification.
2.
A single pilot limited-edition bicycle is created as a proof of concept.
3.
Adventure Works occasionally reuses components from existing bicycles, but most limited-edition bicycles are made of handcrafted components designed to specifications.
4.
Each limited-edition bicycle is built, and hand signed by a single Adventure Works artisan.
5.
Sales price must be auto calculated after the cost price is derived.
6.
Before creating the proof of concept limited-edition bicycle, the approximate sales price needs to be determined through a cost-plus 20 percent calculation.
7.
All items except for the frame in the prototype process are considered finished items and can be sold individually.
8.
The frame items require modifications in accordance with the manufacturing process as well as painting.
9.
Each Adventure Works limited-edition bicycle artisan is scheduled to create a specific number of bicycles in a production run that must be completed by a certain date. 10.Limited-edition bicycle artisans work exclusively on a given run of limited-edition bicycles and are not able to work on other tasks.
Limited-edition bicycle BOM assembly process
The prototype process for the limited-edition bicycles is shown in the following graphic:
Requirements
General
1.
Adventure Works will consist of three legal entities: the primary legal entity of the United States (AWUS), sales in Canada (AWCA), and an international expansion (AWIN).
2.
AWIN must be able to sell only standard model bicycles.
3.
AWUS and AWCA must be able to sell both standard model and limited-edition bicycles.
4.
Warehouse workers must use the Warehouse Management mobile application to manage all inventory inbound and outbound from the warehouse.
Bicycle manufacturing
1.
The handlebars, back wheels, and front wheels must not change for any of the bicycle model configurations.
2.
Standard model bicycle production scheduling must be configured to start as soon as possible.
3.
Bicycle components must be automatically reserved when the item is released to the production floor.
4.
Standard model bicycle production must be automatically created on a predefined schedule.
5.
As soon as bicycles are completed, they must be available to fulfill the backlog of orders.
6.
Limited-edition bicycle production must be configured to meet the end date for when the bicycles must be completed.
7.
Production orders need to track financials by standard model or limited-edition bicycle manufacturing teams.
8.
The system must log the immediate consumption of BOMs for traceability.
9.
All inventory is warehouse enabled.
10.Finished goods are reported as finished by the warehouse worker who picks up the finished product from the packaging area.
11.Finished products must automatically have put-away work completed for them.
New limited-edition bicycle process
Adventure Works is creating a new, limited-edition bicycle to commemorate the company's tenth anniversary. The limited-edition bicycle will be designed for charity events and be produced for the summer season.
1.
The bicycle must be available in men's, women's, and unisex frame styles. It will be painted in one of 50 hand-painted designs representing the charity of the customer's choosing.
2.
A limited run of 100 bicycles must be created.
3.
The limited-edition bicycles must use the same production process as the standard model bicycles.
4.
The limited-edition bicycles must use the same parts used for previous limited-edition bicycles, except for the unique paint colors.
5.
Frames must be painted in-house.
6.
Five painting options are available only in the unisex frame style.
New limited-edition bicycle orders
1.
Customers must be able to place sales orders for the item in the chosen frame configuration, including style and color.
2.
When an order for the new limited-edition bicycle is created, payment must be provided.
3.
An approval for an order must exist for the order to be processed.
4.
Upon approval of an order, production must start immediately and not require re-entry of data.
A. Sales order line
B. Master planning execution
C. Supply schedule form
D. Released item
E. All production orders form
A process manufacturing company is implementing rebates in Dynamics 365 for Finance and Operations for some of their customers on specific items.
You are the production consultant in charge of implementing the processes needed for calculating and applying the rebates for the subset of customers and items.
You need to implement the order of transactions to process the rebates.
In which order should the actions be performed? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
HOTSPOT
You are the production scheduler at a manufacturing company. You schedule estimated production orders and ensure that capacity is used efficiently.
You have an order that must be scheduled at the resource group level and scheduled backward from the delivery date specified on the production order.
You need to schedule the order.
Which scheduling parameters should you use? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
